Water World Int’l Clean-in-Place (CIP) pre-engineered systems for use with WWI standard tap, brackish and seawater reverse osmosis (RO) systems.
The cleaning skid is designed for manual operation through a local control box located on the skid. A chemical storage tank is mounted on its own stand and connected to the skid with either hard PVC piping or quick disconnect fittings and flexible hoses. This gives the unit the ability to be mounted in a permanent location or totally portable if desired. The piping is schedule 80 PVC that is hydrostatically tested at the factory. The electrical enclosure is NEMA 4X. All skid wiring is completed and tested before shipment.
Standard Features:
• Design flow: 40 gpm per vessel 8” diameter
membrane housing
• 304SS centrifugal pump
• polyethylene tanks
• Recirculation valve for mixing
• Tank drain valve
• Cartridge filtration
• Piping is PVC SCH 80
• NEMA 12 electrical enclosure with manual control
• Motor is TEFC.
Application
WWI CIP systems use high quality components and are
skid-mounted for easy on-site cleaning of membrane
systems. The cleaning solution is prepared in the tank and
is recirculated through the RO system to remove foulants,
scale, and more from the membranes. The CIP system flow
range can accommodate up to 6 vessels in parallel.
Optional Accessories
0 - Not needed
1 - pH monitor
2 - Heater and accessories
3 - pH monitor and heater
Notes:
1. Pump and cartridge filter mounted on a common skid. Tank is loose on floor, next to the skid.
2. Flow is based on 40 gpm per 8” diameter housing.
3. Discharge pressure is 65 psi (4.5 bar)
4. Model WWI-CIP-01 & wwi-CIP-02 have multiple pvc cartridge filter housing.
5. Model WWI-CIP-03 or higher have 304 stainless steel cartridge filter housing.
6. Junction box with disconnect switch, on/off indicator, mounted on ski
| 
