STANDARD FEATURES ON ALL TAP PURE RO SYSTEMS UP TO 15,000 PPM TDS
• Corrosion resistant fiberglass ASME approved RO housings (*)
• Skid mounted on heavy duty carbon steel frame, sand blasted, primed and fuse powder coated for maximum corrosion resistance
• High pressure centrifugal pump with heavy duty industrial motor
• High quality and high rejection reverse osmosis membranes. Thin film composite (TFC)
• Sample RO membrane product water ports
• System control electrical enclosure-NEMA 4 with indicator lights & selector switches
• Product water & reject water flow meters. These are panel mounted electric flow meters
• Stainless steel liquid filled low and high pressure gauges. 4 inches in diameter
• Inlet corrosion resistant automatic actuator valve
• Low inlet pressure & high pump pressure safety automatic cut-off switches
• Stainless steel high pressure regulator concentrate valve
• All components and sub-assemblies will be tagged accordingly
• All low pressure piping, valves and fittings will be inert, rigid polyvinylchloride schedule 80 and/or flexible polyethylene
• High pressure piping, valves and fitting will be stainless steel and/or Aeroquip flexible on Tap Pure HBW systems (**)
• Unique low voltage safety control and protection
• All components are high quality with FDA/NSF approval
• 3to 1 pressure safety factor
• The equipment is factory tested and sterilized prior to shipment
• One year warranty on RO plant. Three years prorated warranty on the R/O membranes
AVAILABLE & RECOMMENDED OPTIONS ON TAP PURE RO SYSTEMS UP TO 15,000 PPM TDS
• Sediment 5 micron prefiltration • Hour meter
• Product water automatic float start/stop
• Reject water recycle system
• Digital pH monitor/alarm
• Integrated (PLC) control system
• Digital Temperature monitor/alarm
• Digital panel mounted (PLC) mimic screen
• Digital TDS monitor/alarm
• Stainless steel high pressure pump
• Digital ORP monitor/alarm
• Automatic RO membrane flush system
• Stainless steel piping on high pressure side
• 50 Hz voltage
• Stainless steel piping on product water side
• Export crating & packing
• RO membranes cleaning in place system
• Dosage metering injection pump system(s)
STANDARD FEATURES ON PURE PRO SEAWATER RO SYSTEMS
• Corrosion resistant fiberglass ASME approved RO housings
• Skid mounted on heavy duty carbon steel frame, sand blasted, primed and fuse powder coated for maximum corrosion resistance
• High pressure positive displacement ceramic plunger pump (Nicked aluminum bronze) with heavy duty industrial motor
• High pressure pump inlet & outlet dampeners
• High quality and high rejection reverse osmosis membranes. Thin film composite (TFC)
• Sample RO membrane product water ports
• System control electrical enclosure-NEMA 4 with indicator lights & selector switches
• Product water & reject water flowmeters. These are panel mounted electric flowmeters
• Stainless steel liquid filled low and high pressure gauges. 4 inches in diameter
• Inlet corrosion resistant automatic actuator valve
• Low inlet pressure & high pump pressure safety automatic cut-off switches
• Stainless steel high pressure regulator concentrate valve
• All components and sub-assemblies will be tagged accordingly
• All low pressure piping, valves and fittings will be inert, rigid polyvinylchloride schedule 80 and flexible polyethylene
• All high pressure piping, valves and fitting will be stainless steel and/or Aeroquip flexible
• Unique low voltage safety control and protection
• All components are high quality with FDA/NSF approval
• 3to 1 pressure safety factor
• The equipment is factory tested and sterilized prior to shipment
• One year warranty on RO plant. Three years prorated warranty on the R/O membranes
AVAILABLE & RECOMMENDED OPTIONS ON PURE PRO SEAWATER RO SYSTEMS
• Sediment 5 micron prefiltration
• Total hour meter
• Digital pH monitor/alarm
• 50 Hz voltage
• Digital Temperature monitor/alarm
• Integrated (PLC) control system
• Digital TDS monitor/alarm
• Digital panel mounted (PLC) mimic screen
• Digital ORP monitor/alarm
• Dosage metering injection pump system(s)
• RO membrane cleaning in place system
• Energy recovery unit (ERU)
• Automatic low quality product water by-pass valve
• Export crating & packing
• Automatic RO membrane product flush
| 
